Combined heat and power system for stoves with thermoelectric generators

Solid-fuel stoves are used in developing countries, remote locations, and in general more commonly due to convenient fuel cost for space heating. The possibility of also using the stove heat to heat water and produce electricity represents an added benefit. This work presents an application of thermoelectric generators to a solid-fuel stove to concurrently charge a lead-acid battery and transfer heat to water for heating or household use. The feasibility of the proposed CHP system is demonstrated for a common solid-fuel stove. This system produces an average of 600 Wth and 27 Wel (42 Wel peak) during a 2-h long experiment in which the TEG efficiency is around 5% and the MPPT efficiency of the power converters used is demonstrated

Rankine Cycle efficiency gain using thermoelectric heat pumps

The Rankine cycle remains the dominant method of thermal plant electricity generation in the world today. The cycle was described over 150 years ago and significant performance advances continue to be realised. On-going metallurgy research has enabled the operating pressure and temperature of the boiler and turbine to be increased, thereby improving the cycle efficiency. The ubiquitous use of the Rankine cycle on a massive scale in conjunction with fossil fuels as the energy source continues to motivate further efficiency improvements in the cycle.<p></p> Previous work established a theoretical basis for the use of thermoelectric heat pumps (THPs) in the condensation process of the Rankine cycle to positively impact cycle efficiency. The work presented here experimentally validates this prior work and provides performance metrics for current commercially available THPs and quantifies how their use can increase the efficiency of the Rankine cycle as implemented in a large power plant.<p></p> A commercial THP is characterised to obtain its Coefficient of Performance (COP) variation with input current and the amount of thermal energy transported. A larger-scale system comprising of a multistage thermoelectric heat pump is then considered, demonstrating that using commonly available THPs a fuel load reduction of over 1.5% is achievable for a typical generating set whilst simultaneously increasing the overall plant cycle efficiency from 44.9% to 45.05%.<p></p> The paper concludes with a cost-benefit analysis of the system, showing that over a four year period the saving in fuel used can easily re-coup the capital cost incurred by the addition of the condenser heat pump

Thermoelectric energy harvester with a cold start of 0.6 °C

This paper presents the electrical and thermal design of a thermoelectric energy harvester power system and its characterisation. The energy harvester is powered by a single Thermoelectric Generator (TEG) of 449 couples connected via a power conditioning circuit to an embedded processor. The aim of the work presented in this paper is to experimentally confirm the lowest ΔT measured across the TEG (ΔTTEG) at which the embedded processor operates to allow for wireless communication. The results show that when a temperature difference of 0.6 °CΔTTEG is applied across the thermoelectric module, an input voltage of 23 mV is generated which is sufficient to activate the energy harvester in approximately 3 minutes. An experimental setup able to accurately maintain and measure very low temperatures is described and the electrical power generated by the TEG at these temperatures is also described. It was found that the energy harvester power system can deliver up to 30 mA of current at 2.2 V in 3ms pulses for over a second. This is sufficient for wireless broadcast, communication and powering of other sensor devices. The successful operation of the wireless harvester at such low temperature gradients offers many new application areas for the system, including those powered by environmental sources and body heat

Experimental and Numerical Investigation of Thermal Performance of a Crossed Compound Parabolic Concentrator with PV Cell

Crossed compound parabolic concentrator (CCPC) is a solar energy device used to increase the photovoltaic (PV) cell electrical power output. CCPC’s thermal and optical performance issues are equally important for a PV cell or module to work under a favourable operating condition. However, most work to-date is emphasised on its optical performance paying a little attention to the thermal characteristics. In this contribution, we investigate the thermal performance of a CCPC with PV cell at four different beam incidences (0o, 10o, 20o, 30o and 40o). Initially, experiment is performed in the indoor PV laboratory at the University of Exeter with 1kW/m2 radiation intensity. 3D simulations are carried out to first validate the predicted data and then to characterise the overall performance. Results show that the temperature in the PV silicon layer is the highest at 0o and 30o, with the top glass cover of CCPC having the lowest temperature at all the incidences. The temperature and optical efficiency profiles at the various incidences predicted by simulation show very good agreement with the measurements, especially at 0o incidence. This study provides useful information for understanding the coupled optical-thermal performance of the CCPC with PV cell working at various conditions

Natural convective heat transfer in a walled CCPC with PV cell

The free convective heat transfer phenomenon in an isolated, walled CCPC with PV cell is studied experimentally at 1000 W/m2 irradiance and 28.5 °C ambient temperature as well as 0°, 10°, 20°, 30° and 40° incidences in indoor laboratory by using solar simulator. Then a series of numerical simulations are launched to estimate the CCPC natural heat transfer behaviour and optical performance based on steady heat transfer and laminar flow models with grey optical option. It is identified that the heat transfer and optical performances of CCPC are dependent on the incidence. Especially, the PV cell is subject to the highest temperature at an incidence less than 20°, and otherwise the top glass cover is with the highest temperature. The predicted temperatures, Nusselt numbers and heat loss ratios are consistent with the experimental observations basically, especially at the incidence less than 20° with (−10.1~+3) % error in temperature, (−35.6~+12.6) % in Nusselt number, and (−1.2~+20.5) % in CCPC wall heat loss ratio. The optical parameters predicted agree very well with the measurements. The heat loss from the CCPC walls accounts for nearly 60% of the total incoming solar irradiance and should be paid significant attention in the design of CCPC

Acoustic analysis and mood classification of pain-relieving music

Listening to preferred music (that which is chosen by the participant) has been shown to be effective in mitigating the effects of pain when compared to silence and a variety of distraction techniques. The wide range of genre, tempo, and structure in music chosen by participants in studies utilizing experimentally induced pain has led to the assertion that structure does not play a significant role, rather listening to preferred music renders the music functionally equivalent as regards its effect upon pain perception. This study addresses this assumption and performs detailed analysis of a selection of music chosen from three pain studies. Music analysis showed significant correlation between timbral and tonal aspects of music and measurements of pain tolerance and perceived pain intensity. Mood classification was performed using a hierarchical Gaussian Mixture Model, which indicated the majority of the chosen music expressed contentment. The results suggest that in addition to personal preference, associations with music and the listening context, emotion expressed by music, as defined by its acoustical content, is important to enhancing emotional engagement with music and therefore enhances the level of pain reduction and tolerance

Experimental and Numerical Investigation of Thermal Performance of a Crossed Compound Parabolic Concentrator with PV Cell

Crossed compound parabolic concentrator (CCPC) is a solar energy device used to increase the photovoltaic (PV) cell electrical power output. CCPC’s thermal and optical performance issues are equally important for a PV cell or module to work under a favourable operating condition. However, most work to-date is emphasised on its optical performance paying a little attention to the thermal characteristics. In this contribution, we investigate the thermal performance of a CCPC with PV cell at four different beam incidences (0o, 10o, 20o, 30o and 40o). Initially, experiment is performed in the indoor PV laboratory at the University of Exeter with 1kW/m2 radiation intensity. 3D simulations are carried out to first validate the predicted data and then to characterise the overall performance. Results show that the temperature in the PV silicon layer is the highest at 0o and 30o, with the top glass cover of CCPC having the lowest temperature at all the incidences. The temperature and optical efficiency profiles at the various incidences predicted by simulation show very good agreement with the measurements, especially at 0o incidence. This study provides useful information for understanding the coupled optical-thermal performance of the CCPC with PV cell working at various conditions